Cleaning and milling machines

Set contains 4 screwsWacker replacement screws, 4 pieces for fasteningthe replacement blades

1 set = 3 piecesBHI replacement screws for fastening the replacement blades in a set of 3

For cleaning tools and woodworking machines.Ballistol is extremely economical and easy to use. Spray on briefly and the resin can be removed without leaving any residue. Effective cleaner for burnt-in resin residues. For saw blades, planes, chisels and other resinous tools.Extremely economical and easy to use.Foams up - no dripping Biodegradable Spray on - wipe off - finishedContents: 750 ml

High quality BHI plastering and milling machine with electric motor and reduction gear,adjustable milling head. 115 mm log intake, possibility of adjustingof the milling result from 40 to 70 mm. Precision knives, easy knife change due to fixed knife seat. Protective flap with automaticautomatic shutter. The built-in reduction gear optimises speed and power. This considerably reduces the amount of force and jerking movements during the reduced. The individually positionable foot switch ensures easy operation.Technical data230 volts 1.5 kW Milling head adjustable 40 to 70 mm 550 rpm GS testedWeight approx. 52 kg

High quality BHI plastering and milling machine with electric motor and reduction gear,adjustable milling head. 115 mm log intake, possibility of adjustingof the milling result from 40 to 70 mm. Precision knives, easy change of knives due to fixed knife seat. Protective flap with automaticautomatic shutter. The built-in reduction gear optimises speed and power. This considerably reduces the amount of force and jerking movements during the reduced. The individually positionable foot switch ensures easy operation.Technical data400 volt 1.5 kW Milling head adjustable 40 to 70 mm 550 rpm GS testedWeight approx. 52 kg

High-quality mobile and easy-to-handle BHI 3-head plastering and milling machine. Type V 3.K with 400 volt electric motor, 3 fixed milling heads 40-60-80 mm.   Precision knives, easy knife change due to fixed knife seat. Protective flaps with automatic closure. Wear-free three-phase motor with constant power.   Technical data -400 volts -3.0 kW -3 fixed milling heads 40-60-80 mm Weight approx. 118 kg    

High-quality mobile and easy-to-handle BHI 3-head plastering and milling machine. Type V 3.K with petrol engine (13HP), 3 fixed milling heads 40-60-80 mm.   Precision knives, easy knife change due to fixed knife seat. Protective flaps with automatic closure.   Technical data -Petrol engine -13 HP -270 cc -3 fixed milling heads 40-60-80 mm Weight approx. 118 kg    

High quality BHI plastering and milling machine with 400 volt electric motor,adjustable milling head. 125 mm log intake, possibility of adjustingof the milling result from 70 to 90 mm. Precision blade, easyknife change due to fixed knife seat. Protective flap with automaticautomatic lock. Low-wear three-phase motor with constant power. The individually placeable foot switch ensures easy operation.Technical data400 volt 2.2 kW Milling head adjustable 70 to 90 mm 550 rpm GS testedWeight approx. 54 kg

High quality replacement knives for BHI milling machines V-1.2 and V-2.2.   Milling head size: 40 - 70 mm and 70 - 90 mm

1 pack = 25 pieces Chip bag made of Kraft paper, 2-ply 80 g / sqm suitable for Wacker sharpening machine.   45 x 60 + 20 cm base, 2-ply with glued filling rim and thumb rash

1 set = 2 piecesDIWA - Spare blade - 100 mm - Set of 2

1 set = 2 piecesThese are precision knives made of high-quality HS "high-performance steel". They are hardened and tempered throughout and therefore have very homogeneous hardness ratios. The long service life and the balance of our knives ensure high balancing quality and smooth running in use. Our knives also have a high degree of straightness and of course comply with the applicable EN standards and regulations.    

1 canister = 1.5 litre DIWA Cleaner 5 l Machine cleaning concentrate Removes: oil and grease, tree resins, algae and verdigris, fertiliser and spraying agent residues as well as nearly all soiling occurring in forestry and agriculture. DIWA Cleaner is odourless, non-flammable and non-toxic, and is 98% biodegradable. It is also phosphate-free, EDTA (ethylenediaminetetraacetic acid) and NTA (nitrilotriacetic acid) free.   Composition: Potassium hydroxide, anionic surfactants, non-ionic surfactants, Complexing agents, auxiliaries   Safety data sheet: Sicherheitsdatenblatt DIWA Cleaner

1 canister = 10 litres DIWA Cleaner 10 litres Machine cleaning concentrate Removes: oils and greases, tree resins, algae and verdigris, fertiliser and spray residues as well as almost all soiling occurring in forestry and agriculture. DIWA Cleaner is odourless, non-flammable and non-toxic, in addition to being 98% biodegradable. It is also phosphate- free, EDTA (ethylenediaminetetraacetic acid) and NTA (nitrilotriacetic acid) free.   Composition: Potassium hydroxide, anionic surfactants, non-ionic surfactants, complexing agents, auxiliaries   Safety data sheet: Sicherheitsdatenblatt DIWA Cleaner  

1 canister = 22 litres DIWA Cleaner 22 litres Machine cleaning concentrate Removes: oils and greases, tree resins, algae and verdigris, fertiliser and spray residues as well as almost all soiling occurring in forestry and agriculture. DIWA Cleaner is odourless, non-flammable and non-toxic, in addition to being 98% biodegradable. It is also phosphate- free, EDTA (ethylenediaminetetraacetic acid) and NTA (nitrilotriacetic acid) free.   Composition: Potassium hydroxide, anionic surfactants, non-ionic surfactants, complexing agents, auxiliaries   Safety data sheet: Sicherheitsdatenblatt DIWA Cleaner

1 canister = 5 litres DIWA Cleaner 5 litres Machine cleaning concentrate Removes: oil and grease, tree resins, algae and verdigris, fertiliser and spraying agent residues as well as nearly all soiling occurring in forestry and agriculture. DIWA Cleaner is odourless, non-flammable and non-toxic, and is 98% biodegradable. It is also phosphate-free, EDTA (ethylenediaminetetraacetic acid) and NTA (nitrilotriacetic acid) free.   Composition: Potassium hydroxide, anionic surfactants, non-ionic surfactants, Complexing agents, auxiliaries   Safety data sheet: Sicherheitsdatenblatt DIWA Cleaner  

DIWA Cleaner 5l removes oil and grease, tree resins, algae and verdigris, fertiliser and spraying agent residues, as well as almost all soiling occurring in forestry and agriculture. It is odourless, non-flammable and non-toxic, and 98% biodegradable. It is also phosphate free, EDTA (ethylenediaminetetraacetic acid) free and NTA (nitrilotriacetic acid) free.Composition:Potassium hydroxide,anionic surfactants, non-ionic surfactants,complexing agents, adjuvants.Hand Sprayer Marolex Industry Alka line 1500This hand sprayer sprays in all positions (360 ° Flex-Line) and independently of the filling level with a pressure of up to 4 bar. Tank size 1.5 litres, 4bar max. pressure, 360° flexibility, sprays in all positions, transparent fill level indicator, ergonomic design, dosing handle with start/stop and continuous spray function, nozzle infinitely adjustable and exchangeable, safety pressure relief valve, EPDM seal kit. High resistance to a wide range of chemicals, in areas for e.g.: Industry, car care, disinfection, workshops, construction sector and many more.

High-quality milling heads made of cast aluminium with reinforcement ring for DIWA milling machines.

DIWA double head milling machine 400 Volt without reduction gear up to 180 mm trunk diameter,fixed two-blade milling head with precision blades, milling result ( 40 mm / 50 mm / 60 mm / 70 mm / 80 mm) depending on the selected milling head, reinforced shaft ball bearings and protective flap with automatic closure. The individually positionable foot switch ensures simple operation. Safety cut-out for double use. All machines are suitable for cleaning and milling with full aluminium heads.Technical data400 V / 2.2 kW / 1400 rpm.DIWA 400 V double-head milling machine with 2 cast aluminium milling heads (40 - 60 mm) or DIWA 400 V double-head plastering and milling machine with 2 solid aluminium milling heads (70 - 80 mm) freely selectable.

Milling machine with 4-stroke petrol engine from BRIGGS & STRATTON. Fully galvanised housing with self-swinging cover. Fully galvanised, sturdy base frame. Cast aluminium tiller head, each with two tiller blades. Ideal for use in cultivation or in sales areas without sufficient power supply.Log intake up to 170 mm / Milling length 130 - 150 mm / BRIGGS & STRATTON 4-stroke engine / Power 4 kW (6.5 HP) / Reduction gear 6:1/ with Ø 70 additional support bearing installedDIWA milling machine petrol BS, DIWA two-blade milling headOptional: 30 / 40 / 50 / 60 mm milling heads made of cast aluminium, 70 mm made of solid aluminium.

DIWA milling machine 230 V with reduction gearbox up to a maximum trunk diameter of 180 mm, fixed two-blade milling head with precision blades, milling result (30 mm / 40 mm / 50 mm / 60 mm / 70 mm / 80 mm) depending on the selected milling head, reinforced shaft ball bearings and protective flap with automatic closure. The individually positionable foot switch ensures easy operation. All machines are suitable for milling with a cast aluminium head.Technical dataLog uptake up to 180 mm Milling length 140-150 mm 230 V electric motor / power 2.2 kW  Reduction from 1480 rpm to 550 rpmOptional: 30/40/50/60 mm DIWA two-blade milling head made of cast aluminium for milling only or 70/80 mm two-blade milling head made of solid aluminium for cleaning and milling.

DIWA milling machine 400 Volt without reduction gear up to 180 mm trunk diameter,fixed two-blade milling head with precision blades, milling result (30 mm / 40 mm / 50 mm / 60 mm / 70 mm / 80 mm) depending on the selected milling head, reinforced shaft ball bearings and protective flap with automatic closure. The individually positionable foot switch ensures easy operation. All machines are suitable for milling with a cast aluminium head.- Durable machine due to fully galvanised housing- Large selection of different DIWA two-blade milling head sizes- Optionally as a milling machine or fettling and milling machine- Fixed knife seat for quick changeTechnical dataFully galvanised housing / Depending on the milling head size: Log pick-up up to 180 mm andMilling length 130-150 mm / DIWA two-blade milling head / 400 V electric motor with 2.2 kW / 1400 rpm / Safety foot switch.Safety foot switch. Optional: 30 / 40 / 50 / 60 mm milling heads made of cast aluminium, 70/80 mm made of solid aluminium.

Set contains 4 screwsDIWA replacement screws, 4 pieces for fasteningthe replacement blades

Hightlights of the hand sprayer:4bar max. pressureTank size 1.5 litres360° flexibility, sprays in all positionstransparent fill level indicatorergonomic designDosing handle with start/stop and continuous spray functionNozzle infinitely adjustable and changeableSafety overpressure valveEPDM seal kitHigh resistance to a wide range of chemicals, in areas for e.g.: Industry, car care, disinfection, workshops, construction sector and many more.The design makes the sprayer even easier to hold. This hand sprayer sprays in all positions (360 ° Flex-Line), regardless of the filling level. No hand sprayer has ever been so flexible, and with a pressure of up to 4 bar. For better reading of the filling level, you have a fully transparent viewing window. Further advantages lie in the operation of the sprayer. It not only has a start/stop trigger, but also a continuous spray function. Also new is the safety pressure relief valve, which now releases the pressure at the touch of a button. Thanks to the EPDM seals, this hand sprayer is ideal for alkaline or slightly acidic pH ranges.